***** Opening Firewall ***** In order to get plots, you need to open the firewall to USB ports for the LS28_APP. This can be done in one of three ways: 1. Disable the Firewall (not recommended) 2. Manually (you need to be logged in as Administrator) See LS-28M Network Interface Setup Guide.pdf supplied. 3. Va program OpenFirewall.exe supplied. To execute the OpenFirewall.exe, right click on the application icon in the Start Menu (Lumistarls28/Openfirewall), select Run as Administrator, a nd provide credentials if required. **************************** ****** Release Notes ****** Date Version Author Remarks 05-12-16 1.0 ewj First Revisioned Beta Test 05-15-16 1.1 ewj updated to Bobs new Lib/DLL 05-16-16 1.2 ewj Per Sha x/y reversed in constallation graphs removed old Dave Ini Stuff tangled mess 05-16-16 1.3 ewj Implemented the Operational Mode Calls and begain debugging the enables in each mode 05-17-16 1.4 ewj Put in Enables based on FW Load Type Put in Auto IF Filter BW Calculation 05-24-16 1.5 ewj Bert Status Fixed (Bob's fix), new DLL, Fixed Delay in starting plots when changing displays. 06-03-16 1.6 ewj Updated Bert/Status/ and implemented Data Control Thread which funnels all plotting updates through it. Also, implemented ebno etc, 06-10-16 1.7 ewj Implemented data control thread, and control panel (debug only) Minor updates 07-08-16 1.8 ewj Implemented G/T calcs, alpha release for testing 07-12-16 1.9 ewj 11:00 Changed Frequency Bands so it will see holes in the table due to hardware implementation 07-13-16 1.10 ewj 15:35 Turned off all plots and data, fixed RSSI progress chart 07-13-16 - ??? 1.10x-??? Debug updates for Brian/Bob 10f - Status Interleave switch for Bob 10g - Reset Brick implemented to shut off all displays on initializationCombiner set up when in combiner mode on initialization 09-10-16 1.10h ewj Trouble Ticket 2-0011 - On the HOME tab, when transitioning between operational modes, it would be nice to have a stored set of display settings. 09-15-16 1.10i ewj Trouble Ticket 2-0003 - Carrier Acq Adjust Calls LS28M1LibraryFunctionCalls_20160815_Home_PSK.xls 09-16-16 1.10j ewj Trouble Ticket 2-00013 - FM Deviation not Reported 09-17-16 1.10k ewj Trouble Ticket 2-00016 - Move Data Inverted and Clock Phase to Digpcmdlg. 09-17-16 1.10l ewj Trouble Ticket 2-00021 - Allow ll plot tyes for all modes 09-17-16 1.10m ewj Worked with Bob to get combiner setup calls correctly. 09-28-16 1.10n ewj Integrated all of Bob/Brian/Sha s changes on checkout 09-28-16 1.10o ewj Implemented Sha's MS_PCMFM calc ES No calculatiom Implemente Sha's Eye Chart scale range when in MS-PCMFM mode 09-29-16 1.10p ewj Changed IF Filter BW display so that when in auto mode, displays actual if filter no. returned 09-29-16 1.10q ewj MS_PCMFM Updates for Bryan 09-30-16 1.10r reb Mod Index for MS_PCMFM for Sha. 09-30-16 1.10s ewj Added max/min for mod index, implemented Sha's Change. 10-05-16 1.10t ewj Add Home First Options Checkbox and implemented Home First if checked.Fixed left over pixels on Constallatin Displays 10-17-16 1.11 ewj Many many updates to support 3U displays 10-18-16 1.11a ewj Added signal comb calls to send data to brick (wasn't there when dialog was built) fixed the phantm eye chart line. 10-19-16 1.12 ewj Fixed the eye chart phantom lime problem (Brick sending plot signal w/o data on startup) 10-20-16 1.13 ewj /reb Fixes for the combiner updates 11-01-16 1.14 ewj T5S 1-0023, TTS 1-0024, TTS 1-0025 Updates 11-02-16 1.15 ewj Moved TestBert to TBert base class for 3U display 11-03-16 1.16 ewj Made 3U Tabs at the bottom bigger 11-15-16 1.17 ewj Dump Spectral data for Sha 11-12-16 1.18 ewj No Zest and Update .cfg files 11-18-16 1.19 ewj Clwaned up problems in status and dialog displays, added Splash Screen 11-30-16 1.20 ewj Re did dll to for new Comm lib which included MHCPM 12-06-16 1.21 ewj Added MHCPM Signal Form, fixes tts-31-37,added new dll from bobs source, started licensing implementation 12-14-16 1.22 ewj Added Licensing Dialog and finished up licensing, hardcopies to licensing and envionment displays 12-16-16 1.23 ewj Misc changes 12-16-16 1.24 ewj Debugged Licensing and added manual links 12-16-16 1.25 ewj Fixed Minor Bug 12-16-16 1.26 ewj Fixed Demod bug when not in PSK mode on channel 2 12-21-16 1.27 ewj Updated Splash Window 12-21-16 1.28 ewj Fixed splash screens on install 12-21-16 1.29 ewj Fixed minor bugs found by timo and bryan 12-21-16 1.30 ewj Fixed Bert Patter select 12-22-16 1.31 ewj Cleaned up File Structures and Ini Files 01-06-17 1.32 ewj Moved Test Bert for 3 U displays, testing firewall app on install 01-24-17 1.33 ewj Fixed count in ebno calcs for pcmfm mode 02-03-17 1.34 ewj Implemented SS-FM/FM Video Filter Auto Mode 02-07-17 1.35 ewj Fixed voltage scaling on environment tab 02-22-17 1.36 ewj Regenerated DLL fro bob's new comm classes 07-05-17 1.37 ewj/BB Chanted ber and sample ber to per sample rate, not per second 07-19-17 1.38 ewj/BB Added a load last setup or load last state feature system->options 07-19-17 1.38 ewj/BB Implemented a way to bypass ls28 query in startup. Under system->options 07-27-17 1.39 ewj/BB Implement channel copy checkbox. Still implementing channel copy buttons. 07-28-17 1.40 ewj/BB Implemented stop all and start all for tbert. Also changed some things with laod last setup and state 08-01-17 1.41 ewj/BB Made minor changes some dialogs and fixed bugs 8-16-17 1.44a ewj/BB Made some minor changes to ranges on signal FM page and also to datarate on home 8-17-17 1.44b&c ewj/BB Fixed the packet error issues associated with spectral display 8-17-17 1.44b&c ewj/BB Fixed the packet collection in the other graphs. (Spec, Const, Eye) 8-18-17 1.44e ewj/BB Modied the placement of multiple mutex locks 8-18-17 1.44e ewj/BB Fixed Access Violation error associated with UdpSocket. 8-18-17 1.44e ewj/BB Modied Modified System menu items. 8-18-17 1.44e ewj/BB Changed multiple dialogs in system menu to match new designs. 8-23-17 1.45 ewj/BB Implemented startup options. Password enabled and encrypted. 8-24-17 1.45b ewj/BB Fixed some issues with lock lights and blinking yellow light in status 8-24-17 1.45b ewj/BB Fixed minor issue in GUI 8-29-17 1.46 ewj/BB Log Receiver Params GUI finished. 8-30-17 1.47 ewj/BB Changed password entering to once per run. 8-30-17 1.47 ewj/BB Log light implemented. 8-31-17 1.47 ewj/BB Added an AM invert checkbox for both channels. 8-31-17 1.47 ewj/BB Changed AM Mode to be defualt or manual radio button. 8-31-17 1.47 ewj/BB AM Mode choice will disable level adj. 9-1-17 1.47 ewj/BB Cannot click on spectral display if comb is set. 9-1-17 1.47 ewj/BB Changed the name of the folder the log files are placed . 9-5-17 1.48 ewj/BB Added data tab (Data-Time) 9-6-17 1.48 ewj/BB Changed persistance on display tab. 9-11-17 1.49 ewj/BB Still changing AM Invert Stuff. Lets try this again. 9-21-17 1.50 ewj/BB Completed DataRecord Tab. Still Testing 9-21-17 1.50 ewj/BB Completed the UI for all other tabs other than DecomWdAttr 9-21-17 1.50 ewj/BB Fixing Voltage and Amps on Environment page. 9-25-17 1.51 ewj/BB Made a minor change with lock lights 9-25-17 1.51 ewj/BB Fixed Video I Level adjust for combiner. 9-29-17 1.52 ewj/BB Finished IRIG Time. Made an adjustment to IF Level Adjust 10-2-17 1.52 ewj/BB Fixed the reinitialize all on all pages psk,fm,ms etc 10-2-17 1.52 ewj/BB Made some changes for data time page for saving and initialization 10-2-17 1.52 ewj/BB Starting to work on Frame Sync. A few things are completed. 10-10-17 1.53 ewj/BB Frame Sync Finished, needs more testing 10-10-17 1.53 ewj/BB Decom almost finished 10-11-17 1.54 ewj/BB New DLL's 10-13-17 1.55 ewj/BB Finished Up Decom and Framesync. Needs Testing 10-13-17 1.55 ewj/BB Added Streaming enables and lights. These still need work. No actual streaming right now. 10-18-17 1.56 ewj/BB Finished DecomWordAttributes 10-18-17 1.56 ewj/BB Changed license page to have lights instead of Y/N 10-21-17 1.57 bb/BB Streaming implemented. CVT table on data stream right. 10-21-17 1.57 BB Added a show/hide checkbox for the CVT on data stream right. 10-21-17 1.57 BB Added a stream selection for the display of CVT 10-21-17 1.58 BB Changed the way TBert update. No longer updating all the time. 10-31-17 1.58 BB Fixing the updates throughout the app. 10-31-17 1.58 BB Still working on TBert. Needs to confirm changes 10-31-17 1.58 BB Made a build without Data Tab for Customers. 10-31-17 1.59 BB Put data tab back in. (Dont use this version. State data is not being saved. 10-31-17 1.59a BB State data being saved again. 10-31-17 1.59a BB Added Minimize bar to main dialog. 11-2-17 1.59b BB Made a build without Data Tab for Customers. 11-2-17 1.59b BB Fixed Tbert Sampling. Still playing around with it. 11-6-17 1.60 BB Put in commas for larger numbers on Time, Record, Decom, Frame Sync. 11-7-17 1.60 BB Fixed Decom FAC and subframes modes associated with it. 11-7-17 1.60 BB Primary and Secondary bits and bit errors added to logging. 11-8-17 1.60 BB Fixed the reset for TBert 11-9-17 1.60 BB Still in the process of Fixing the stop/start for BER averaging. 11-10-17 1.60 BB BER averaging Start/Stop is fixed. 11-10-17 1.61 BB Fixed the precision in logging file for number of bits for both primary and secondary. 11-10-17 1.61 BB Added Licensing to Data Tab. 11-13-17 1.61 BB New DLL's. 11-13-17 1.61 BB Modified the status dialog update(optimization). 11-13-17 1.61 BB Frame Sync lights are now responsive even when not on frame sync page. 11-14-17 1.62 BB Added blinking test light for any loopback enabled. 11-14-17 1.62 BB Fixed Combiner light blinking when combiner is disabled. 11-17-17 1.62 BB Fixed precision of logging. However, this is causing other issues. 11-17-17 1.62 BB Modified timing on UDP requests. They were happening far to frequently. 11-17-17 1.62 BB Modified the logging algorithm. 11-20-17 1.62 BB Fixed RSSI and text blinking in status updates. 11-20-17 1.62 BB Fixed Logging. It is now more precise. Still working on getting this perfected. 11-20-17 1.62 BB Added Alt on pop ups. Modified the way this was happening from the original implemntation. 11-20-17 1.62 BB Fixed bug associated with secondary bit logging. 11-20-17 1.62 BB Can no longer save or recall state or setup files while logging is in progress. 11-27-17 1.62 BB Recall state and recall setup file has been changed. Can now change when modes are different. 11-28-17 1.63 BB Bit Sync BB bug fixed 11-30-17 1.63 BB USER IO UI is finished. Waiting on backend. 12-4-17 1.63 BB Bit Sync Input source select Added. 12-5-17 1.63 BB Bit Sync Impedance Select Added. 12-5-17 1.63 BB Enhanced Aquisition. 12-8-17 1.63 BB Channel copy moved for 3U. Can now be seen on left panel. 12-10-17 1.63 BB Added a way to customize graphs under tool menu. 1-5-18 1.64 BB Finished User IO 1-29-18 1.65 BB Support for older boards 1-29-18 1.65 BB Support for older boards *** NOTE: Anything prior to this version (1.66) will not work in Windows 10 *** 1-31-18 1.66 BB Fixed an issue with critical sections 1-31-18 1.66 BB Fixed issue with GTCalcs dialog not showing properly. 2-5-18 1.67 BB Revised the way the app launches. Gave a round about way for direct IP connections. Still working on checking side effects. 2-7-18 1.67 BB Fixed grapsh associated with MHCPM 2-13-18 1.68 BB Added a frequency step feature. 2-16-18 1.69 BB Fixed bug associated with User IO input/output 2-16-18 1.69 BB Added Customize RSSI Bar feature under Tools menu 2-16-18 1.69 BB Modified Open Collector Dialog 2-16-18 1.69 BB Modified color chooser on display menu 2-20-18 1.69 BB Fixed Aliases on certain pages. 2-26-18 1.70 BB Changed Freeze and zero for RSSI bars. Also added delta values when in zero mode. 3-5-18 1.71 BB Fixed Combiner mode when in SS mode 3-5-18 1.71 BB Modified status dialog when in SS mode 3-17-18 1.72 BB Changed the behavior of invert lights on Tbert page 3-17-18 1.72 BB Fixed loopbacks for Q on Tbert page 3-17-18 1.72 BB Added an Info page alert based on multiple parameters on info tab 3-17-18 1.72 BB Added a light for temperature on info tab 3-19-18 1.72 BB Changed Directory Structure for App and Install 3-26-18 1.72 BB Modified enables for home page. 3-26-18 1.72 BB Added input source alias in user interface options. ** NOTE: This is a key date moving foward for combatability management ** ** New Naming scheme as follows: xx.yy.zz ** ** xx = Generation ; yy = Major Version ; zz = Minor Version ** 3-26-18 1.07.01 BB New DLLs Made. Coincides with new firmware 3-30-18 1.07.01 BB Added logging feature for future factory use. 3-30-18 1.07.01 BB Added a firmware check and compatability message at startup. 3-30-18 1.07.01 BB Fixed the ranged for CF on Display tab. 4-2-18 1.07.01 BB Modified the Home tab displays for certain modes. 4-4-18 1.07.01 BB Added O/S bits and MAC address to log file 4-4-18 1.07.01 BB Added MAC address to environment tab. 4-6-18 1.07.02 BB Fixed a bug on Decom page. SFID locator had issues. 4-6-18 1.07.02 BB Fixed bug on home page with pcm input code 4-24-18 1.07.03 BB Fixed the data streaming page. Can now stream both channels and use CVT 4-25-18 1.07.03 BB Modified streaming behavior. You can no longer enable or disable a stream once it has started.To do so, the user must first stop the stream enable/disable and then start the stream again. 4-24-18 1.07.03 BB Switching CVT table radio button will now clear the data remaining in the CVT table. 4-30-18 1.07.03 BB Fixed a data request issue with streaming 5-3-18 1.07.03 BB Moved the compatability check to the app log ** NOTE: This is a key date moving foward for combatability management ** ** New Naming scheme as follows: xx.yy.zz ** ** xx = Generation ; yy = Major Version ; zz = Minor Version ** 6-1-18 1.08.01 BB New DLL's. This also corresponds to a DSP: data 05-30-2018 6-4-18 1.08.01 BB Starting to work on FEC page. 6-4-18 1.08.01 BB Fixed input selections for frame sync page. New selections were added. 6-6-18 1.08.01 BB In the process of adding a new operational mode (LDPC 4/5) 6-20-18 1.08.01 BB Fixed Decom Word Attributes problem associated with start and end word index when writing multiple entries. 6-20-18 1.08.01 BB Added internal storage option to the file menu on app. Still needs checking and re iteration. 6-25-18 1.08.01 BB Finished FEC Page 6-25-18 1.08.01 BB Finished LDPC 4/5. 6-25-18 1.08.01 BB Beginning development on LDPC Encoder. 6-26-18 1.08.01 BB Finished LDPC Encoder. 6-26-18 1.08.01 BB Beginning development on PCM Encoder. 6-27-18 1.08.01 BB New DLL's 6-28-18 1.08.01 BB Finished PCM Encoder. 6-28-18 1.08.01 BB LDPC 1/2 and 2/3 modes are implemented. 6-28-18 1.08.01 BB Added boot internally checkbox on homepage. Only appears if switch is enabled. 7-2-18 1.08.01 BB Fixed duplication issue in LDPC mode associated with tune frequency. 7-3-18 1.08.01 BB Enter key will now press ok on pop control entries. 7-3-18 1.08.01 BB Re Made all default files. 7-3-18 1.08.01 BB New DLL's 7-3-18 1.08.01 BB Fixed TBert issue in LDPC mode. 7-9-18 1.08.02 BB Fixed Issue with Decom and Frame sync. changing word attributes will send down frame sync length from decom. 7-10-18 1.08.02 BB Added Frame sync length to frame sync page if decom is not enabled. 7-10-18 1.08.02 BB Fixed Combiner type issue. No longer changes when leaving the signal->combiner page. ** NOTE: This is a key date moving foward for combatability management ** ** New Naming scheme as follows: xx.yy.zz ** ** xx = Generation ; yy = Major Version ; zz = Minor Version ** 7-12-18 1.09.01 BB Fixed an issue with decom page on setup recalls. Gui was not being properly updated. 7-17-18 1.09.01 BB Added a mod index reference in MS_PCMFM mode. Option to display is located under User Interface Options. 7-25-18 1.09.01 BB Implemented Spectral Display modes and windowing types. 7-30-18 1.09.01 BB Fixed the updating of the bit sync page when in bit sync mode. 7-30-18 1.09.01 BB Still working on getting all the spectral display stuff working correctly. 7-30-18 1.09.01 BB Fixed Enables on digital routing page when in bit sync mode. 7-30-18 1.09.01 BB Added Input select to home page in bitsync mode. 7-31-18 1.09.01 BB New DLL's .. Fixed issue with udp requests in older 28's 8-10-18 1.09.01 BB New DLL's. Contain Bit sync changes. 8-10-18 1.09.01 BB Fixed a bug in channel 1 Decom page. Word attributes were not being sent down. 8-13-18 1.09.01 BB Fixed an issue with LDPC when changing input source. Bit rate was not being sent down. 8-13-18 1.09.01 BB Fixed an issue with LDPC when in combiner mode. 8-15-18 1.09.01 BB Fixed input box prompts throughtout app. 8-17-18 1.09.01 BB Fixed issue with MHCPM not send data requests. 8-17-18 1.09.01 BB Fixed Data Streaming issue when in different streaming cases. The cvt was not being populated. 8-20-18 1.09.01 BB Spectral charts finished. 8-20-18 1.09.01 BB Spectral chart Minimum span lowered to 1M. 8-20-18 1.09.01 BB Persistence maximum lowered to 1s. 8-21-18 1.09.01 BB Fixed issue with Decom Word Attributes page. Writing multiple words was not working properly. 8-22-18 1.09.01 BB Fixed issue with SFID length calculation and SFID MSB 8-30-18 1.09.02 BB Fixed Decom Word Attribute page algorithm. Fixed bugs associated with different frame lengths. 8-30-18 1.09.02 BB Decom Word Attributes can now be stored and retrieved with setup and state files. 8-31-18 1.09.02 BB Fixed updating issue with data streaming 9-04-18 1.09.02 BB Added expanded CVT buttons. 9-04-18 1.09.02 BB New DLL's. 9-04-18 1.09.02 BB Added Major frame lock lights. 09-12-18 1.09.03 BB Fixed issue with major frame lock when switching operational modes. 09-21-18 1.09.03 BB Direct Networking is now functional. 09-21-18 1.09.03 BB Fixed issue with frame sync trailing. 09-21-18 1.09.03 BB Modified User IO initialization. 09-21-18 1.09.03 BB Modified erasing on the recording page. 09-24-18 1.09.03 BB Changed App name on icon and ribbon. 09-26-18 1.09.03 BB Made changes to Data Streaming page 09-26-18 1.09.03 BB Fixed Streaming issue with multiple minor frames per datagram 09-27-18 1.09.03 BB Fixed issue with SFID location on channels 2 and 3 09-27-18 1.09.03 BB Added Datagram frequency to data stream page. 10-27-18 1.09.03 BB Added Direct Streaming 10-27-18 1.09.03 BB Added multicast capability 10-27-18 1.09.03 BB ACI feature added 10-27-18 1.09.03 BB Added save to sharedAciFile feature 10-28-18 1.09.03 BB Fixed file save and recall extensions 10-30-18 1.09.03 BB Added an ACI document look up button 11-16-18 1.09.04 BB Added a save feature and re arranged menu items. 11-16-18 1.09.04 BB Changed the way the info tab updates in accordance with new save logic. ** NOTE: This is a key date moving foward for combatability management ** ** New Naming scheme as follows: xx.yy.zz ** ** xx = Generation ; yy = Major Version ; zz = Minor Version ** 11-21-18 1.10.01 BB New DLL's 11-26-18 1.10.01 BB Changed progress bar colors on test bert page. Displaying dark green only now. 11-26-18 1.10.01 BB Fixed KB conversion on recording page. 11-26-18 1.10.01 BB Removed misplaced button on data stream page. 11-27-18 1.10.01 BB Added Consolidated Status Thread Class. 11-27-18 1.10.01 BB Added Consolidated Status Stream to networking page. 11-28-18 1.10.01 BB Removed Read calls associated with Consolidated Status. 12-18-18 1.10.01 BB Added Download progress bar for recordings. 12-18-18 1.10.01 BB Recording now stops automatically when no more recording space is available. 12-21-18 1.10.01 BB Recording total now increments as recording is happening. 12-21-18 1.10.01 BB Remaining space now decrements as recording is happening. 12-21-18 1.10.01 BB Added estimated time remaining field in on data record tab. 12-21-18 1.10.01 BB User cannot record when memory is full. Must erase first. 1-7-19 1.10.02 BB New DLL's 1-7-19 1.10.02 BB Fixed issue with recording updates when a channel is selected but not enabled for recording. 1-8-19 1.10.02 BB Implemented license check for Advanced Network Settings. 1-8-19 1.10.02 BB Implemented license check for Decoms on Network page. 1-8-19 1.10.02 BB Modified info tab for ACI interface changes. 1-9-19 1.10.02 BB Mod index issue with combiner in MS mode has been fixed. 1-9-19 1.10.02 BB Modified the info tab setup file update when in ACI mode. 1-14-19 1.10.03 BB Fixed issue with saving and retrieving of a networking key. Important to ACI functionality 1-24-19 1.10.04 BB Changed the IRIG logic for lock light. 2-11-19 1.10.05 BB Fixed the bit sync (Mbps) update for SignalFM right page 2-12-19 1.10.05 BB Span for graphs is now being saved and recalled correctly. 2-26-19 1.10.06 BB Changed the scale for MHCPM per Sha. 2-27-19 1.10.06 BB Added Radio buttons on recording page for standard and custom headers. 2-27-19 1.10.06 BB Standard headers will now generate and add information into the header for later conversion 2-27-19 1.10.06 BB Custom headers work like the old ones. 2-27-19 1.10.06 BB File names for downloaded archive files have been changed as well as file names that go into the LS28. 2-27-19 1.10.06 BB Modulator tab has been added. GUI only. 2-28-19 1.10.06 BB Fixed Networking issue with multi cast sockets. Sockets were not being close properly in certain situations. 2-28-19 1.10.06 BB File Conversion GUI finished. 3-4-19 1.10.06 BB Fixed LDPC reset issue when leaving and re entering page. 3-5-19 1.10.06 BB Added a little bit of logging to help with ACI issues. 3-8-19 1.10.06 BB Fixed BER issue with 0's being trimmed off the right side. 3-13-19 1.10.06 BB Added file name setting for standand recordings 3-13-19 1.10.06 BB Fixed issue with IRIG format changing with recording files. IRIG time is now set to BCD is one of the recording channels is set to standard. 3-13-19 1.10.06 BB Finishing up file conversion. Files are being converting, need testing. 3-14-19 1.10.06 BB Changed status window when in Bitsync mode. 3-14-19 1.10.06 BB Changed input select for REV 8 boards for bit sync mode. 3-14-19 1.10.06 BB New DLL's. 3-15-19 1.10.06 BB Made minor changes to the recording changes. 3-21-19 1.10.06 BB Fixed issue with julian days on IRIG page. 3-21-19 1.10.06 BB Made changes to status page Eb/No and Mod Index. 3-24-19 1.10.07 BB Modulator tab is now complete. 3-26-19 1.10.07 BB Changed input source on Home page to now have options. 3-26-19 1.10.07 BB Added Modulator parameters to save files. 3-26-19 1.10.07 BB Added spin control to modulator power and reconstruction power. 3-27-19 1.10.07 BB Added Launch with stored modulator enables check box to startup option menu. 3-27-19 1.10.07 BB Modulator now is re initialized on recall of state, setup file, ACI recall and mode switch. 3-28-19 1.10.07 BB Fixed the sample seconds display issues in TBert Page. 3-28-19 1.10.07 BB Fixed TBert page for Q column on demodsub mode selections. 4-8-19 1.10.08 BB Fixed bug on Tbert page. The RX - bert parameters were not being saved correctly. 4-9-19 1.10.08 BB Fixed Recall issues with RX - bert page. 4-9-19 1.10.08 BB Fixed Recall issues with BER averaging section. 4-10-19 1.10.09 BB Fixed issues with TX Bert recalls. 4-11-19 1.10.09 BB Added a recall ACI file button to file menu. 4-16-19 1.10.10 BB Changed the way the Serial Number was being retrieved. This fixes the issue when directly signing on to brick. 4-16-19 1.10.10 BB Added IRIG Ch10 Mode to Decommutator Mode. This sets to RAW and changes IRIG time parameters. Takes precedent over Recording. 4-16-19 1.10.10 BB Updated Version info for application. 5-2-19 1.10.10 BB CVT table fix for odd number of words per minor frame. Added one to account for filler word. 5-6-19 1.10.10 BB When IRIG mode is selected IRIG reader is set to ext IRIG. 5-6-19 1.10.10 BB changed data rate input to three decimal places if applicable. 5-9-19 1.10.10 BB ACI file is now saved when the application starts up . 5-9-19 1.10.10 BB Took away project line and added local IP line to the info window on bottom of app. 5-10-19 1.10.10 BB Number of words per datagram is defualted to 692 in IRIG mode. 5-15-19 1.10.11 BB Fixed the input pcm codes on recalls . 5-15-19 1.10.11 BB Release notes button has been added to the file->help menu. 6-5-19 1.10.12 BB Added new User IO options 6-5-19 1.10.12 BB Fixed the IRIG page. No longer reseeds when entering the dialog. 6-11-19 1.10.13 BB Fixed issues with spectral graphs 6-27-19 1.10.14 BB New DLL's 6-27-19 1.10.14 BB Added eb/no seeding into the consolidated status stream. DSP1 must be > 0x20190610 to work 6-10-19 1.10.14 BB Added Auto spanning to the system->user interface menu. Saved in System.CFG 6-10-19 1.10.14 BB Added Auto spanning of spectral charts based on Home page parameters 7-11-19 1.10.14 BB Added auto span when changing channels on display tabs. 7-11-19 1.10.14 BB Fixed Tbert bit rate. 7-18-19 1.10.15 BB Fixed bug with 0x9002 & 0x9003 ACI message. 7-25-19 1.10.15 BB Fixed a bug on startup. Current save files were not correct. 7-25-19 1.10.15 BB TX Bert Ranges have been changed. 1k - 60 Mbps. 7-25-19 1.10.15 BB Added Demod FPGA Configuration EEPROM info to environment page. 7-29-19 1.10.15 BB Serpated CVT updates to a seperate thread. 8-7-19 1.10.16 BB Working on hang issue with app. 8-7-19 1.10.16 BB Added functionality for handling recording decisions while application is starting up. 8-9-19 1.10.16 BB New DLL's 8-19-19 1.10.17 BB Added band checks for frequency step. 8-19-19 1.10.17 BB Frequency step is no longer valid for bit sync mode. 8-23-19 1.10.17 BB Added a new message for ACI (Reset All - TBert) 0x9005 8-30-19 1.10.17 BB Took out force errors button on TBert page. 8-30-19 1.10.17 BB Added new Error Injection line with radio buttons on TBert 8-30-19 1.10.17 BB Added a burst error on Tbert page 8-30-19 1.10.17 BB Fixed time issue when going from recording page to time 9-4-19 1.10.17 BB Added a new message for ACI (TBert Burst) 0x9006 9-4-19 1.10.17 BB Added PTP option on Data->Time page. Not fully working yet. 10-8-19 1.10.18 BB Added Clock invert checkbox to Frame Sync page. 10-11-19 1.10.18 BB New DLL's 10-15-19 1.10.18 BB Added Sim page to Test Tab 10-15-19 1.10.18 BB Added Sim Sim Word Attribtue page to Test Tab 10-15-19 1.10.18 BB Added new lights for test loopback, IF loopback, Sim loopback 10-15-19 1.10.18 BB Refresh Sim button added to lower section along with Sim change light. 10-15-19 1.10.18 BB Took serial option Communications Setup page. 10-15-19 1.10.18 BB Took serial info off of environment tab. 11-1-19 1.10.19 BB Fixed TBert burst issue with recalling a file from ACI. 11-1-19 1.10.19 BB User IO no longer sets default values when opening the dialog. 11-18-19 1.10.20 BB Fixed Signal tab parameters resetting when entering data rate in non assisted setup 11-20-19 1.10.21 BB Fixed Test tab simulator enable issue associated with bit sync mode ** NOTE: This is a key date moving foward for combatability management ** ** New Naming scheme as follows: xx.yy.zz ** ** xx = Generation ; yy = Major Version ; zz = Minor Version ** 12-16-19 1.11.01 BB Sim Dynamic Word tab added. 12-18-19 1.11.01 BB Sim Dynamic Word tab can now read CSV files. 1-8-20 1.11.01 BB Put Tool tips in for various lights throughout the application. 1-25-20 1.11.01 BB Recording tab changed. Took out standard vs custom recording check boxes. 1-25-20 1.11.01 BB Recordings no longer have S appended to the file name for recordings standard recordings. 1-25-20 1.11.01 BB Recordings no longer force BCD time. 1-25-20 1.11.01 BB Recording file conversions will now convert SOY to BCD time for TM1. 2-1-20 1.11.01 BB LS28 can now save and recall Sim settings, .SAF files have been added. 2-4-20 1.11.01 BB Sim Frame Attributes added. 2-4-20 1.11.01 BB Sim dynamic word attributes page now has a change flag. 2-4-20 1.11.01 BB Re initialize Sim button at the bottom of the app tracks Sim and Sim dynamic word attribute changes. 2-4-20 1.11.01 BB Re initialize Sim button sends all sim related messages. 2-4-20 1.11.01 BB Sim will only load on recall if the sim is enabled. 2-6-20 1.11.01 BB Fixed issue with sim dynamic words in small mode. 2-6-20 1.11.01 BB Changed default intervals and behavior for Sim frame attributes popup. 2-6-20 1.11.01 BB Fixed issue with log receiver params button enable. 2-6-20 1.11.01 BB Fixed issue with hiding of secondary controls. 2-6-20 1.11.01 BB Put in license for Sim tab based on decommutator. 2-12-20 1.11.01 BB New DLL's 2-12-20 1.11.01 BB External Input Polarity Controls added to Digital routing page. 2-12-20 1.11.01 BB Auto recording options added to startup options page. 2-13-20 1.11.01 BB Frame sync input pcm code added to frame sync page. 2-13-20 1.11.01 BB Put carrier offset status on Signal psk page 2-13-20 1.11.01 BB PTP Time now a valid selection for time. 2-18-20 1.11.01 BB Fixed Carrier LBW sliders 2-18-20 1.11.01 BB Fixed Combiner enables. 2-18-20 1.11.01 BB New Default files. 2-20-20 1.11.01 BB Fixed an issue with stopping threads 2-20-20 1.11.01 BB Added carrier offset status to all relevant signal tabs 2-20-20 1.11.01 BB Added carrier acq. mode to all relevant signal tabs 2-24-20 1.11.02 BB Adjusting CVT algorithm for multiple minor frames per datagram 3-16-20 1.11.02 BB New DLL's 3-16-20 1.11.02 BB Fixed issue with modulator. 3-26-20 1.11.03 BB Fixed issue with ACI start stream message. 3-30-20 1.11.03 BB New ACI Messages. 3-30-20 1.11.03 BB Added new ACI log. 5-19-20 1.11.03 BB Fixed Simulator issues relating to Frame Sync and common word length. 5-19-20 1.11.03 BB Added Bit order to recording header 6-17-20 1.11.03 BB Fixed frame length calculation issue when recalling a file. 7-7-20 1.11.04 BB Fixed issue with frame sync pattern and odd numbered bits as common word length. 7-15-20 1.11.05 BB New DLL's (Version 1.0.0.14) 7-21-20 1.11.05 BB Added Convolutional Encoder to Test FEC Enc pags 7-21-20 1.11.05 BB Added Invert PCM Code to Test PCM Enc page 7-21-20 1.11.05 BB Added FEC De-InterLeave Select to Test PCM Enc page 7-21-20 1.11.05 BB Added FEC Swap IQ, Interleave to Digital Routing 7-21-20 1.11.05 BB Added PCM Decoder Swap IQ, Interleave to Digital Routing 7-21-20 1.11.05 BB Added PCM Decoder Swap IQ, Interleave to Digital Routing 8-3-20 1.11.05 BB Made Various changes to G/T Calcs page. 8-3-20 1.11.05 BB Added Field support manual to help menu. 8-3-20 1.11.05 BB New LS28M.exe in UserTools folder. 8-4-20 1.11.05 BB Fixed issue with case 3 streaming and CVT . 8-12-20 1.11.05 BB Fixed ACI issue with 28m Reset command. 8-12-20 1.11.05 BB Fixed issue with throughput streaming and CVT. 8-12-20 1.11.05 BB Fixed issue program crashing while streaming (Memory issue). 8-19-20 1.11.05 BB Added PCM Decoder Polarity 8-19-20 1.11.05 BB Added FS PCM Decoder Polarity Invert 8-28-20 1.11.06 BB New DLL's 8-28-20 1.11.06 BB Added Viterbi 9-2-20 1.11.06 BB Fixed crash with re initializing network settings with streaming in progress. 9-16-20 1.11.07 BB Fixed PCM Decoder Polarity issue with combiner. 9-23-20 1.11.07 BB Fixed Filter Bandwidth display in MS_PCMFM 9-24-20 1.11.07 BB Fixed Video Filter display in MS_PCMFM (assist/non assist) 10-12-20 1.11.08 BB Fixed Save internal issue. 10-12-20 1.11.08 BB Fixed issue with Sim frame attributes. 10-12-20 1.11.08 BB Fixed issue with Sim recalls. 10-20-20 1.11.09 BB Modifed All streams to look at EEPROM values. (Requires DSP version 20201020) 10-20-20 1.11.09 BB Changed frame polarity to include auto invert variable. 10-26-20 1.11.09 BB Fixed word attribute issue with lsb first. 11-5-20 1.11.09 BB Modified GUI behavior for FAC and other subframe modes. 11-9-20 1.11.09 BB Fixed a bug in sim word attributes overwriting sim frame attributes. 11-13-20 1.11.09 BB Fixed issue with the unistaller conflicting with other application. 11-16-20 1.11.09 BB Changes to startup. 12-4-20 1.11.10 BB Added TCP Reestablishment if tcp connection is lost during use of SW and SW is still running. 12-10-20 1.01.10 BB Sim load time improvements. 12-10-20 1.01.10 BB Rx Source Select added to Bert Page. (DSP >= 20201119) 12-10-20 1.01.10 BB New DLL's 12-18-20 1.11.11 BB Changed direct launch algorithm. 1-18-21 1.11.11 BB LSB/MSB issue with decom. 1-18-21 1.11.11 BB LDPC command changed. When in throughput mode MSB is selected. 1-21-21 1.11.11 BB Added variable to turn off/on automatic reconnect of tcp (Startup menu). 1-29-21 1.11.12 BB Added Multiple entry method to networking page. *****************************